Yocan Hive 2.0 Instruction

RSS
Yocan Hive 2.0 Instruction

The YoCan Hive 2.0 Vaporizer Kit features an anti-leakage design, and is perfectly sized to comfortably fit your hand. This discreet all-in-one vape device specializes in both e-juice & concentrate use. It contains everything you need to get right into vaping with its internal battery and top-filled atomizer with a magnetic lock-in design.

However, there are people who are not familiar with this new vape kit. In order to help you, please read the following instruction carefully.


Loading the device

Before you fill the eJuice, you have to remember that do not exceed 0.8mL during the loading. Then, you can start fill the atomizer by unscrewing the mouthpiece, removing the juice vape supplement bottle, and squeezing the eJuice along the side of the glass at a slanted corner. After the loading is completed, you can easily reconnect by screwing the atomizer tube. Now, it’s ready to be inserted in the mod.


Adjust the Voltage Level

First, you should open the device and make sure the device is on. There are three voltage indicator lights on the Hive 2.0. You can quickly click the power button 5 times to turn on the device, and then you can see that those three blue lights flash three times at the same time. Hive 2.0 is on, here you go!

The Voltage level can be adjusted by quickly pressing the power butter 3 times. When your device is at low voltage, press the power button three times to switch it to middle voltage, then press the button three times to switch to high voltage.

  • Low Voltage: Only one light shows blue
  • Middle Voltage: Two lights show blue
  • High Voltage: all three  lights show blue

The working time

The Hive 2.0 allows continues heating for 15 seconds maximum. Its vape function will be disable after the lights flash 8 times if you take it over 15 seconds at one time.


Charging the device

You can simply know the battery level according to the voltage indicator lights.

  • Time to charge: 3 blue lights flash at the same time for 10 times
  • 0% - 34% : 3 blue lights flash  in loop
  • 35% - 69%: first blue light remains lit while other two lights continue flashing in loop
  • 70% - 99%: first two blue lights remain lit, and last one keep flashing
  • 100%: 3 blue lights will flash 8 times at the same time, then the lights are off.

As you can see, it’s important to understand the indicator lights. If you still have question, please feel free to contact us. We’re always here to help you. Thanks for your support to Vprocity and enjoy!

Previous Post Next Post

  • Blog VProCity
Comments 0
Leave a comment
Your Name:*
Email Address:*
Message: *
* Required Fields